Semirremolque volquete fondo móvil Fliegl SDS390 Schubboden nuevo
- 07819 Triptis
- Fliegl
|
Información principal
|
|
|---|---|
| Ref. cliente : | Produktpalette |
| Ref. web : | 11509036 |
| Carrocería | Volquete |
| Bajo carrocería | Fondo móvil |
| Marca | Fliegl |
| Gama (marca : Fliegl) | SDS390 |
| Modelo | Schubboden |
| Estado | Nuevo |
| Año | - |
| Fecha 1ª matriculación | |
| País | ALEMANIA |
| Constructor | Fliegl |
Caja de cambios y transmisión |
|
|---|---|
| Precisiones caja de cambios | Boîte automatique |
Equipamiento Semirremolque Fliegl |
|
|---|---|
|
Neumáticos |
|
|---|---|
| Estado y dimensiones de los neumáticos | - |
Suspensión / Ejes |
|---|
|
Comentarios |
|---|
|
Localisation :
• Allemagne Triptis Description: Walking floor Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Achsenkonfiguration: 3 axles Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications Chassis Fine-grained steel welded construction in lightweight design up to the support legs drawbar with interchangeable 2 kingpin Nwjbyoi Riwxjr Rbgyjk Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton 2-speed support winch single-sided operation with straight lower part without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm with holder on the side Tarpaulin rod with bracket 1 plastic toolbox with drawer and insert w=650/h=520/d=670 mm can be locked with a padlock 1 spare wheel holder for 1 spare wheel with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption including forced lowering & starting assist actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front electronic braking system with EBS socket at the front without connecting cable with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer''s choice Steel rims factory silver Electrical System 24 Volt multi-chamber lights yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system Switching between forward/reverse operation is done electrically via remote control with cable Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump performance Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum 8 mm floor profile ribbed design SBS Tipper Body Aluminum box tipper body front and side walls made of aluminum hollow profiles welded around the top with a wide special reinforcement profile made of aluminum and welded with a special frame at the bottom Sliding wall for better unloading of the load with reinforced tarpaulin flaps at the bottom Rear wall made of aluminum hollow profiles as a 2-wing door with a division of 1/2 to 1/2 framed all around with a special U-profile with stop and rubber seal with 2 externally mounted swivel locking rods locked at the top & bottom. Rear wall with mechanical safety locking operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock Standing platfor |
|
Ver todo
|
Comentarios |
|---|
|
Localisation : • Allemagne Triptis Description: Walking floor Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Achsenkonfiguration: 3 axles Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications Chassis Fine-grained steel welded construction in lightweight design up to the support legs drawbar with interchangeable 2 kingpin Nwjbyoi Riwxjr Rbgyjk Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton 2-speed support winch single-sided operation with straight lower part without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm with holder on the side Tarpaulin rod with bracket 1 plastic toolbox with drawer and insert w=650/h=520/d=670 mm can be locked with a padlock 1 spare wheel holder for 1 spare wheel with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption including forced lowering & starting assist actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front electronic braking system with EBS socket at the front without connecting cable with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer''s choice Steel rims factory silver Electrical System 24 Volt multi-chamber lights yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system Switching between forward/reverse operation is done electrically via remote control with cable Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump performance Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum 8 mm floor profile ribbed design SBS Tipper Body Aluminum box tipper body front and side walls made of aluminum hollow profiles welded around the top with a wide special reinforcement profile made of aluminum and welded with a special frame at the bottom Sliding wall for better unloading of the load with reinforced tarpaulin flaps at the bottom Rear wall made of aluminum hollow profiles as a 2-wing door with a division of 1/2 to 1/2 framed all around with a special U-profile with stop and rubber seal with 2 externally mounted swivel locking rods locked at the top & bottom. Rear wall with mechanical safety locking operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock Standing platfor |
|
Información principal
|
|
|---|---|
| Ref. cliente : | Produktpalette |
| Ref. web : | 11509036 |
| Carrocería | Volquete |
| Bajo carrocería | Fondo móvil |
| Marca | Fliegl |
| Gama (marca : Fliegl) | SDS390 |
| Modelo | Schubboden |
| Estado | Nuevo |
| Año | - |
| Fecha 1ª matriculación | |
| País | ALEMANIA |
| Constructor | Fliegl |
Caja de cambios y transmisión |
|
|---|---|
| Precisiones caja de cambios | Boîte automatique |
Equipamiento Semirremolque Fliegl |
|
|---|---|
|
Neumáticos |
|
|---|---|
| Estado y dimensiones de los neumáticos | - |
Suspensión / Ejes |
|---|
|
Comentarios |
|---|
|
Localisation :
• Allemagne Triptis Description: Walking floor Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Achsenkonfiguration: 3 axles Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications Chassis Fine-grained steel welded construction in lightweight design up to the support legs drawbar with interchangeable 2 kingpin Nwjbyoi Riwxjr Rbgyjk Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton 2-speed support winch single-sided operation with straight lower part without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm with holder on the side Tarpaulin rod with bracket 1 plastic toolbox with drawer and insert w=650/h=520/d=670 mm can be locked with a padlock 1 spare wheel holder for 1 spare wheel with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption including forced lowering & starting assist actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front electronic braking system with EBS socket at the front without connecting cable with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer''s choice Steel rims factory silver Electrical System 24 Volt multi-chamber lights yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system Switching between forward/reverse operation is done electrically via remote control with cable Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump performance Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum 8 mm floor profile ribbed design SBS Tipper Body Aluminum box tipper body front and side walls made of aluminum hollow profiles welded around the top with a wide special reinforcement profile made of aluminum and welded with a special frame at the bottom Sliding wall for better unloading of the load with reinforced tarpaulin flaps at the bottom Rear wall made of aluminum hollow profiles as a 2-wing door with a division of 1/2 to 1/2 framed all around with a special U-profile with stop and rubber seal with 2 externally mounted swivel locking rods locked at the top & bottom. Rear wall with mechanical safety locking operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock Standing platfor |
|
Ver todo
|
Comentarios |
|---|
|
Localisation : • Allemagne Triptis Description: Walking floor Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Achsenkonfiguration: 3 axles Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications Chassis Fine-grained steel welded construction in lightweight design up to the support legs drawbar with interchangeable 2 kingpin Nwjbyoi Riwxjr Rbgyjk Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton 2-speed support winch single-sided operation with straight lower part without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm with holder on the side Tarpaulin rod with bracket 1 plastic toolbox with drawer and insert w=650/h=520/d=670 mm can be locked with a padlock 1 spare wheel holder for 1 spare wheel with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption including forced lowering & starting assist actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front electronic braking system with EBS socket at the front without connecting cable with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer''s choice Steel rims factory silver Electrical System 24 Volt multi-chamber lights yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system Switching between forward/reverse operation is done electrically via remote control with cable Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump performance Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum 8 mm floor profile ribbed design SBS Tipper Body Aluminum box tipper body front and side walls made of aluminum hollow profiles welded around the top with a wide special reinforcement profile made of aluminum and welded with a special frame at the bottom Sliding wall for better unloading of the load with reinforced tarpaulin flaps at the bottom Rear wall made of aluminum hollow profiles as a 2-wing door with a division of 1/2 to 1/2 framed all around with a special U-profile with stop and rubber seal with 2 externally mounted swivel locking rods locked at the top & bottom. Rear wall with mechanical safety locking operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock Standing platfor |
Semirremolque volquete Mega nuevo MNL, Alu, 55m³, Kombitür, SAF, Luft-Lift
Semirremolque volquete fondo móvil Reisch R24 / Alu/ Lift / elektr. Dach
Semirremolque volquete Kempf SKM 36/3, 37m³, Okulen, Alu; 6080 Kg,
Semirremolque volquete fondo móvil Krampe BANDIT Walkingfloor m. Laufband Lift Funk